In the current pandemic scenario, publication process of all articles related to Coronavirus will be expedited, for timely publication of much needed research
For journals, the following publication policies are applied by Bentham Science.
Bentham Science Publishers follows the single blind peer-review procedure for submissions of all manuscripts to its journals, except for a selected number of patent journals where double blind review is followed.
All submitted articles are subjected to an extensive peer review in consultation with members of the journal’s editorial board and independent external referees (usually three reviewers). All manuscripts/chapters are assessed rapidly and the decision based on all the peer reviewers' comments, taken by the journal’s Editor-in-Chief, is then conveyed to the author(s).
Submissions from the Editor-in-Chief will undergo independent peer-review and will be submitted to another Editor for his decision on acceptance.
Articles must be written in good English in a clear and correct style in order to maintain uniformity throughout the text. Articles submitted are copyedited before they are published.
High-quality, bound/unbound, print/e-prints can be purchased for all published articles.
Articles must be submitted by one of the authors of the manuscript, and should not be submitted by anyone on their behalf. The principal/corresponding author will be required to submit a Copyright Letter along with the manuscript, on behalf of all the co-authors (if any). The author(s) will confirm that the manuscript (or any part of it) has not been published previously or is not under consideration for publication elsewhere. Furthermore, any illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained.
Generally, the editorial decisions are not reverted. However, authors who think that their manuscript was rejected due to a misunderstanding or mistake may seek an explanation for the decision. Appeals must give sound reasoning and compelling evidence against the criticism raised in the rejection letter. A difference of opinion as to the interest, novelty, or suitability of the manuscript for the journal will not be considered as an appeal. The EIC and other relevant editors will consider the appeal and the decision thereafter taken by the journal will be deemed final. Acceptance of the manuscript is not guaranteed even if the journal agrees to reconsider the manuscript, and the reconsideration process may involve previous or new reviewers or editors and substantive revision.
Authors who wish to make a complaint should refer them to the Editor-in-Chief of the journal concerned. Complaints to the Publisher may be emailed to info@benthamscience.net
Financial contributions to the work being reported should be clearly acknowledged, as should any potential conflict of interest.
Bentham Science uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. iThenticate software checks content against a database of periodicals, the Internet, and a comprehensive article database. It generates a similarity report, highlighting the percentage of overlap between the uploaded article and the published material. Any instance of content overlap is further scrutinized for suspected plagiarism according to the publisher’s Editorial Policies. Bentham Science allows an overall similarity of 20% for a manuscript to be considered for publication. The similarity percentage is further checked keeping the following important points in view
The text of every submitted manuscript is checked using the Content Tracking mode in iThenticate. The Content Tracking mode ensures that manuscripts with an overall low percentage similarity (but may have a higher similarity from a single source) are not overlooked. The acceptable limit for similarity of text from a single source is 5%. If the similarity level is above 5%, the manuscript is returned to the author for paraphrasing the text and citing the original source of the copied material.
It is important to mention that the text taken from different sources with an overall low similarity percentage will be considered as a plagiarized content if the majority of the article is a combination of copied material.
There may be some manuscripts with an overall low similarity percentage, but a higher percentage from a single source. A manuscript may have less than 20% overall similarity but there may be 15% similar text taken from a single article. The similarity index in such cases is higher than the approved limit for a single source. Authors are advised to thoroughly rephrase the similar text and properly cite the original source to avoid plagiarism and copyright violation.
We all know that scholarly manuscripts are written after thorough review of previously published articles. It is therefore not easy to draw a clear boundary between legitimate representation and plagiarism. However, the following important features can assist in identifying different kinds of plagiarized content. These are:
Published manuscripts which are found to contain plagiarized text are retracted from the journal’s website after careful investigation and approval by the Editor-in-Chief of the journal. A ‘Retraction Note’ as well as a link to the original article is published on the electronic version of the plagiarized manuscript and an addendum with retraction notification in the particular journal.
Accepted articles can be published online for free open access. Open access publishing provides maximum dissemination of the article to the largest audience. All authors will be asked to indicate whether or not they wish to pay to have their paper made freely available on publication. If authors do not select the 'Open Access Plus (Gold Open Access)' option, then their article will be published with standard subscription-based access.
Editors/Authors who contribute in a Bentham’s Journal will transfer copyright to their work to Bentham Science Publishers. Submission of a manuscript to the respective journals implies that all editors/authors have read and agreed to the content of the copyright letter.
All clinical investigations should be conducted according to the Declaration of Helsinki principles. For all manuscripts reporting data from studies involving human participants, formal review and approval by an appropriate institutional review board or ethics committee are required.
For research involving animals, the authors should indicate whether the procedures followed were in accordance with the standards set forth in the eighth edition of “Guide for the Care and Use of Laboratory Animals” (grants.nih.gov/grants/olaw/guide-for-the-care-and-use-of-laboratory-animals_prepub.pdf published by the National Academy of Sciences, The National Academies Press, Washington, D.C.).
Research work on animals should be carried out in accordance with the NC3Rs ARRIVE Guidelines. For In Vivo Experiments, please visit https://www.nc3rs.org.uk/arrive-guidelines
Authors should clearly state the name of the approval committee, highlighting that legal and ethical approvals were obtained prior to initiation of the research work carried out on animals, and that the experiments were performed in accordance with the relevant guidelines and regulations stated below.
All experimental research on plants (either cultivated or wild), should comply with international guidelines. The manuscript should include a declaration of compliance of field studies with relevant guidelines and/or relevant permissions or licenses obtained by the IUCN Policy Statement on Research Involving Species at Risk of Extinction and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.
Compliance with the guidelines of the International Committee of Medical Journal Editors www.icmje.org) is recommended, in accordance with the patient’s consent for research or participation in a study as per the applicable laws and regulations regarding the privacy and/or security of personal information, including, but not limited to, the Health Insurance Portability and Accountability Act of 1996 ("HIPAA") and other U.S. federal and state laws relating to confidentiality and security of personally distinguishable evidence, the General Data Protection Regulation (GDPR) (EU) 2016/679 and member state implementing legislation, Canada's Personal Information Protection and Electronic Documents Act, India's Information Technology Act and related Privacy Rules, (together "Data Protection and Privacy Laws").
It is the responsibility of the author to ensure that:
Editors may request that authors provide documentation of the formal review and recommendation from the institutional review board or ethics committee responsible for oversight of the study. The editors reserve the right to reject manuscripts that do not comply with the above-mentioned requirements. The author will be held responsible for false statements or failure to fulfill the above-mentioned requirements.
Anonymous images, that do not identify the individual directly or indirectly, such as through any identifying marks or text, do not require formal consent, for example, X-rays, ultrasound images, pathology slides or laparoscopic images.
In case consent is not obtained, concealing the identity through eye bars or blurring the face would not be acceptable.
Authors and readers are encouraged to notify the Editor-in-Chief if they find errors in published content, authors’ names and affiliations or if they have reasons for concern over the legitimacy of a publication. In such cases the journal will publish an ERRATUM in consultation with Editor-in-Chief and authors of the article, and/or replace or retract the article.
Articles in Press (articles that have been accepted for publication or published as E-pub Ahead of Schedule but which have not been formally published with volume/issue/page information) that include errors, or are determined to violate the publishing ethics guidelines such as multiple submission, fake claims of authorship, plagiarism, fraudulent use of data or the like, may be “Withdrawn” from the journal. Withdrawal means that the article files are removed and replaced with a PDF stating that the article has been withdrawn from the journal in accordance with BSP Editorial Policies.
Published articles (with volume/issue/page information) which may contain infringements of professional ethical codes, such as multiple submissions, bogus claims of authorship, plagiarism, fraudulent use of data or the like are retracted.
Abstracts and posters of conferences, results presented at meetings (for example, to inform investigators or participants about findings), results databases (data without interpretation, discussion, context or conclusions in the form of tables and text to describe data/information where this is not easily presented in tabular form) are not considered prior publication.
Authors who wish to publish translations of the articles that have been published elsewhere should ensure that they have appropriate permission(s), indicate clearly that the material has been translated and re-published, and indicate clearly the original source of the material. The Editor-in-Chief may request copies of related publications if he/she is concerned about overlap and possible redundancy.
Bentham Science has collaborated with the Copyright Clearance Center to meet its customer’s licensing, besides rights & permission needs.
The Copyright Clearance Center’s RightsLink® service makes it faster and easier to secure permission from Bentham Science journal titles. Simply visit Journals by Title and locate the desired content. Then go to the article’s abstract and click on “Rights and Permissions” to open the RightsLink’s page. If you are unable to locate the content you wish to use or are unable to secure the rights you are seeking, please e-mail us at permissions@benthamscience.net
Published/reproduced material should not be included unless written permission has been obtained from the copyright holder, which should be forwarded to the Editorial Office in case of acceptance of the article for publication.
Responsibility for the content published by Bentham Science Publishers in any of its journals, including any opinions expressed therein, rests exclusively with the author(s) of such content. To the maximum extent permitted by applicable law, BSP (on its own behalf, and on behalf of its staff and members of its editorial board) disclaims responsibility for any and all injury and/or damage (whether financial or otherwise) to persons or property, resulting directly or indirectly from any ideas, methods, instructions or products (including errors in the same) referred to in the content of any of BSP’s journals. Any dispute arising, including any claim shall be governed exclusively by the laws of the United Arab Emirates, as applied in the Emirate of Sharjah.
![]() |
Micro and Nanomachining Technology-Size, Model and Complex MechanismYou can view the contents of this eBook [here] or purchase it [here]. |